Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- s -

• SBAS_AUTO : gps.h
• SBAS_EGNOS : gps.h
• SBAS_GAGAN : gps.h
• SBAS_MODE_MAX : gps.h
• SBAS_MSAS : gps.h
• SBAS_WAAS : gps.h
• sbasMode : gps.h
• sbasMode_e : gps.h
• sbuf_t : streambuf.h
• sbufAdvance() : streambuf.c , streambuf.h
• sbufBytesRemaining() : streambuf.c , streambuf.h
• sbufPtr() : streambuf.c , streambuf.h
• sbufReadData() : streambuf.c , streambuf.h
• sbufReadU16() : streambuf.c , streambuf.h
• sbufReadU32() : streambuf.c , streambuf.h
• sbufReadU8() : streambuf.c , streambuf.h
• sbufSwitchToReader() : streambuf.c , streambuf.h
• sbufWriteData() : streambuf.c , streambuf.h
• sbufWriteString() : streambuf.c , streambuf.h
• sbufWriteU16() : streambuf.c , streambuf.h
• sbufWriteU32() : streambuf.c , streambuf.h
• sbufWriteU8() : streambuf.c , streambuf.h
• sbus_inversion : rx.h
• sbusFrameStatus() : sbus.h
• sbusInit() : sbus.h
• scale : mixer.h
• scaleLedValue() : light_ws2811strip.c , light_ws2811strip.h
• scaleRange() : maths.c , maths.h
• scaleRangef() : maths.c , maths.h
• SCREEN_CHARACTER_COLUMN_COUNT : display_ug2864hsweg01.h
• SCREEN_CHARACTER_ROW_COUNT : display_ug2864hsweg01.h
• SCREEN_HEIGHT : display_ug2864hsweg01.h
• SCREEN_WIDTH : display_ug2864hsweg01.h
• SDCARD_ACOMMAND_SEND_OP_COND : sdcard_standard.h
• SDCARD_ACOMMAND_SET_WR_BLOCK_ERASE_COUNT : sdcard_standard.h
• sdcard_beginWriteBlocks() : sdcard.h
• SDCARD_BLOCK_OPERATION_ERASE : sdcard.h
• SDCARD_BLOCK_OPERATION_READ : sdcard.h
• SDCARD_BLOCK_OPERATION_WRITE : sdcard.h
• SDCARD_BLOCK_SIZE : sdcard_standard.h
• SDCARD_COMMAND_APP_CMD : sdcard_standard.h
• SDCARD_COMMAND_GO_IDLE_STATE : sdcard_standard.h
• SDCARD_COMMAND_READ_MULTIPLE_BLOCK : sdcard_standard.h
• SDCARD_COMMAND_READ_OCR : sdcard_standard.h
• SDCARD_COMMAND_READ_SINGLE_BLOCK : sdcard_standard.h
• SDCARD_COMMAND_SEND_CID : sdcard_standard.h
• SDCARD_COMMAND_SEND_CSD : sdcard_standard.h
• SDCARD_COMMAND_SEND_IF_COND : sdcard_standard.h
• SDCARD_COMMAND_SEND_OP_COND : sdcard_standard.h
• SDCARD_COMMAND_SEND_STATUS : sdcard_standard.h
• SDCARD_COMMAND_SET_BLOCKLEN : sdcard_standard.h
• SDCARD_COMMAND_STOP_TRANSMISSION : sdcard_standard.h
• SDCARD_COMMAND_WRITE_BLOCK : sdcard_standard.h
• SDCARD_COMMAND_WRITE_MULTIPLE_BLOCK : sdcard_standard.h
• SDCARD_CSD_STRUCTURE_VERSION_1 : sdcard_standard.h
• SDCARD_CSD_STRUCTURE_VERSION_2 : sdcard_standard.h
• SDCARD_CSD_V1_CCC_LEN : sdcard_standard.h
• SDCARD_CSD_V1_CCC_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_COPY_LEN : sdcard_standard.h
• SDCARD_CSD_V1_COPY_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_CRC_LEN : sdcard_standard.h
• SDCARD_CSD_V1_CRC_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_CSD_STRUCTURE_VER_LEN : sdcard_standard.h
• SDCARD_CSD_V1_CSD_STRUCTURE_VER_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_CSIZE_LEN : sdcard_standard.h
• SDCARD_CSD_V1_CSIZE_MULT_LEN : sdcard_standard.h
• SDCARD_CSD_V1_CSIZE_MULT_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_CSIZE_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_DSR_IMPLEMENTED_LEN : sdcard_standard.h
• SDCARD_CSD_V1_DSR_IMPLEMENTED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_ERASE_SINGLE_BLOCK_ALLOWED_LEN : sdcard_standard.h
• SDCARD_CSD_V1_ERASE_SINGLE_BLOCK_ALLOWED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_FILE_FORMAT_GROUP_LEN : sdcard_standard.h
• SDCARD_CSD_V1_FILE_FORMAT_GROUP_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_FILE_FORMAT_LEN : sdcard_standard.h
• SDCARD_CSD_V1_FILE_FORMAT_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_NSAC_LEN : sdcard_standard.h
• SDCARD_CSD_V1_NSAC_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_PERMANENT_WRITE_PROTECT_LEN : sdcard_standard.h
• SDCARD_CSD_V1_PERMANENT_WRITE_PROTECT_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_R2W_FACTOR_LEN : sdcard_standard.h
• SDCARD_CSD_V1_R2W_FACTOR_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_READ_BLOCK_LEN_LEN : sdcard_standard.h
• SDCARD_CSD_V1_READ_BLOCK_LEN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_READ_BLOCK_MISALIGN_LEN : sdcard_standard.h
• SDCARD_CSD_V1_READ_BLOCK_MISALIGN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_READ_BLOCK_PARTIAL_ALLOWED_LEN : sdcard_standard.h
• SDCARD_CSD_V1_READ_BLOCK_PARTIAL_ALLOWED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_SECTOR_SIZE_LEN : sdcard_standard.h
• SDCARD_CSD_V1_SECTOR_SIZE_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_TAAC_LEN : sdcard_standard.h
• SDCARD_CSD_V1_TAAC_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_TEMPORARY_WRITE_PROTECT_LEN : sdcard_standard.h
• SDCARD_CSD_V1_TEMPORARY_WRITE_PROTECT_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_TRAILER_LEN : sdcard_standard.h
• SDCARD_CSD_V1_TRAILER_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_TRAN_SPEED_LEN : sdcard_standard.h
• SDCARD_CSD_V1_TRAN_SPEED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_VDD_READ_CURR_MAX_LEN : sdcard_standard.h
• SDCARD_CSD_V1_VDD_READ_CURR_MAX_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_VDD_READ_CURR_MIN_LEN : sdcard_standard.h
• SDCARD_CSD_V1_VDD_READ_CURR_MIN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_VDD_WRITE_CURR_MAX_LEN : sdcard_standard.h
• SDCARD_CSD_V1_VDD_WRITE_CURR_MAX_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_VDD_WRITE_CURR_MIN_LEN : sdcard_standard.h
• SDCARD_CSD_V1_VDD_WRITE_CURR_MIN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_BLOCK_LEN_LEN : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_BLOCK_LEN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_BLOCK_MISALIGN_LEN : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_BLOCK_MISALIGN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_BLOCK_PARTIAL_ALLOWED_LEN : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_BLOCK_PARTIAL_ALLOWED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_PROTECT_GROUP_ENABLE_LEN : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_PROTECT_GROUP_ENABLE_OFFSET : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_PROTECT_GROUP_SIZE_LEN : sdcard_standard.h
• SDCARD_CSD_V1_WRITE_PROTECT_GROUP_SIZE_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_CCC_LEN : sdcard_standard.h
• SDCARD_CSD_V2_CCC_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_COPY_LEN : sdcard_standard.h
• SDCARD_CSD_V2_COPY_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_CRC_LEN : sdcard_standard.h
• SDCARD_CSD_V2_CRC_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_CSD_STRUCTURE_VER_LEN : sdcard_standard.h
• SDCARD_CSD_V2_CSD_STRUCTURE_VER_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_CSIZE_LEN : sdcard_standard.h
• SDCARD_CSD_V2_CSIZE_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_DSR_IMPLEMENTED_LEN : sdcard_standard.h
• SDCARD_CSD_V2_DSR_IMPLEMENTED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_ERASE_SINGLE_BLOCK_ALLOWED_LEN : sdcard_standard.h
• SDCARD_CSD_V2_ERASE_SINGLE_BLOCK_ALLOWED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_FILE_FORMAT_GROUP_LEN : sdcard_standard.h
• SDCARD_CSD_V2_FILE_FORMAT_GROUP_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_FILE_FORMAT_LEN : sdcard_standard.h
• SDCARD_CSD_V2_FILE_FORMAT_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_NSAC_LEN : sdcard_standard.h
• SDCARD_CSD_V2_NSAC_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_PERMANENT_WRITE_PROTECT_LEN : sdcard_standard.h
• SDCARD_CSD_V2_PERMANENT_WRITE_PROTECT_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_R2W_FACTOR_LEN : sdcard_standard.h
• SDCARD_CSD_V2_R2W_FACTOR_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_READ_BLOCK_LEN_LEN : sdcard_standard.h
• SDCARD_CSD_V2_READ_BLOCK_LEN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_READ_BLOCK_MISALIGN_LEN : sdcard_standard.h
• SDCARD_CSD_V2_READ_BLOCK_MISALIGN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_READ_BLOCK_PARTIAL_ALLOWED_LEN : sdcard_standard.h
• SDCARD_CSD_V2_READ_BLOCK_PARTIAL_ALLOWED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_SECTOR_SIZE_LEN : sdcard_standard.h
• SDCARD_CSD_V2_SECTOR_SIZE_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_TAAC_LEN : sdcard_standard.h
• SDCARD_CSD_V2_TAAC_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_TEMPORARY_WRITE_PROTECT_LEN : sdcard_standard.h
• SDCARD_CSD_V2_TEMPORARY_WRITE_PROTECT_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_TRAILER_LEN : sdcard_standard.h
• SDCARD_CSD_V2_TRAILER_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_TRAN_SPEED_LEN : sdcard_standard.h
• SDCARD_CSD_V2_TRAN_SPEED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_BLOCK_LEN_LEN : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_BLOCK_LEN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_BLOCK_MISALIGN_LEN : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_BLOCK_MISALIGN_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_BLOCK_PARTIAL_ALLOWED_LEN : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_BLOCK_PARTIAL_ALLOWED_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_PROTECT_GROUP_ENABLE_LEN : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_PROTECT_GROUP_ENABLE_OFFSET : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_PROTECT_GROUP_SIZE_LEN : sdcard_standard.h
• SDCARD_CSD_V2_WRITE_PROTECT_GROUP_SIZE_OFFSET : sdcard_standard.h
• SDCARD_DETECT_EXTI_IRQn : target.h
• SDCARD_DETECT_EXTI_LINE : target.h
• SDCARD_DETECT_EXTI_PIN_SOURCE : target.h
• SDCARD_DETECT_EXTI_PORT_SOURCE : target.h
• SDCARD_DETECT_GPIO_CLK : target.h
• SDCARD_DETECT_GPIO_PORT : target.h
• SDCARD_DETECT_INVERTED : target.h
• SDCARD_DETECT_PIN : target.h
• SDCARD_DMA_CHANNEL_TX : target.h
• SDCARD_DMA_CHANNEL_TX_COMPLETE_FLAG : target.h
• SDCARD_GET_CSD_FIELD : sdcard_standard.h
• sdcard_getMetadata() : sdcard.h
• sdcard_init() : sdcard.h
• sdcard_isFunctional() : sdcard.h
• sdcard_isInitialized() : sdcard.h
• sdcard_isInserted() : sdcard.h
• SDCARD_MULTIPLE_BLOCK_WRITE_START_TOKEN : sdcard_standard.h
• SDCARD_MULTIPLE_BLOCK_WRITE_STOP_TOKEN : sdcard_standard.h
• SDCARD_OPERATION_BUSY : sdcard.h
• SDCARD_OPERATION_FAILURE : sdcard.h
• SDCARD_OPERATION_IN_PROGRESS : sdcard.h
• SDCARD_OPERATION_SUCCESS : sdcard.h
• sdcard_operationCompleteCallback_c : sdcard.h
• sdcard_poll() : sdcard.h
• sdcard_profilerCallback_c : sdcard.h
• SDCARD_R1_STATUS_BIT_ADDRESS_ERROR : sdcard_standard.h
• SDCARD_R1_STATUS_BIT_COM_CRC_ERROR : sdcard_standard.h
• SDCARD_R1_STATUS_BIT_ERASE_RESET : sdcard_standard.h
• SDCARD_R1_STATUS_BIT_ERASE_SEQUENCE_ERROR : sdcard_standard.h
• SDCARD_R1_STATUS_BIT_IDLE : sdcard_standard.h
• SDCARD_R1_STATUS_BIT_ILLEGAL_COMMAND : sdcard_standard.h
• SDCARD_R1_STATUS_BIT_PARAMETER_ERROR : sdcard_standard.h
• sdcard_readBlock() : sdcard.h
• sdcard_setProfilerCallback() : sdcard.h
• SDCARD_SINGLE_BLOCK_READ_START_TOKEN : sdcard_standard.h
• SDCARD_SINGLE_BLOCK_WRITE_START_TOKEN : sdcard_standard.h
• SDCARD_SPI_CS_GPIO : target.h
• SDCARD_SPI_CS_PIN : target.h
• SDCARD_SPI_FULL_SPEED_CLOCK_DIVIDER : target.h
• SDCARD_SPI_INITIALIZATION_CLOCK_DIVIDER : target.h
• SDCARD_SPI_INSTANCE : target.h
• SDCARD_TIMEOUT_READ_MSEC : sdcard_standard.h
• SDCARD_TIMEOUT_WRITE_MSEC : sdcard_standard.h
• SDCARD_VOLTAGE_ACCEPTED_2_7_to_3_6 : sdcard_standard.h
• SDCARD_VOLTAGE_ACCEPTED_LVR : sdcard_standard.h
• sdcard_writeBlock() : sdcard.h
• sdcardBlockOperation_e : sdcard.h
• sdcardCSD_t : sdcard_standard.h
• sdcardInsertionDetectDeinit() : sdcard.h
• sdcardInsertionDetectInit() : sdcard.h
• sdcardMetadata_t : sdcard.h
• sdcardOperationStatus_e : sdcard.h
• sectionTimes : debug.c , debug.h
• sectorsPerCluster : fat_standard.h
• sectorsPerTrack : fat_standard.h
• selection : sensors.h
• SELF_TEST_HIGH_LIMIT : compass_hmc5883l.c
• SELF_TEST_LOW_LIMIT : compass_hmc5883l.c
• SEND_BREAK : usb_prop.h
• SEND_ENCAPSULATED_COMMAND : usb_prop.h
• sendLength : hw_config.c
• SENSOR_ACC : sensors.h
• sensor_align_e : sensors.h
• SENSOR_BARO : sensors.h
• SENSOR_GPS : sensors.h
• SENSOR_GPSMAG : sensors.h
• SENSOR_GYRO : sensors.h
• SENSOR_INDEX_ACC : initialisation.h
• SENSOR_INDEX_BARO : initialisation.h
• SENSOR_INDEX_GYRO : initialisation.h
• SENSOR_INDEX_MAG : initialisation.h
• SENSOR_MAG : sensors.h
• sensor_mask_t : ninja.h
• SENSOR_NAMES_MASK : cli.c
• SENSOR_SONAR : sensors.h
• sensorAccInitFuncPtr : sensor.h
• sensorGyroInitFuncPtr : sensor.h
• sensorIndex_e : initialisation.h
• sensorInitFuncPtr : sensor.h
• sensorIsDataReadyFuncPtr : sensor.h
• sensorReadFuncPtr : sensor.h
• sensors : config.h , flight_altitudehold_unittest.cc
• sensors_e : sensors.h
• SENSORS_SET : target.h
• sensorsAutodetect() : initialisation.c , initialisation.h
• sensorsSet() : sonar_unittest.cc
• serial : config.h
• SERIAL_BIDIR : serial.h
• SERIAL_CONTROL_DEV : common.h
• SERIAL_CONTROL_DEV_ENUM_END : common.h
• SERIAL_CONTROL_DEV_GPS1 : common.h
• SERIAL_CONTROL_DEV_GPS2 : common.h
• SERIAL_CONTROL_DEV_TELEM1 : common.h
• SERIAL_CONTROL_DEV_TELEM2 : common.h
• SERIAL_CONTROL_FLAG : common.h
• SERIAL_CONTROL_FLAG_BLOCKING : common.h
• SERIAL_CONTROL_FLAG_ENUM_END : common.h
• SERIAL_CONTROL_FLAG_EXCLUSIVE : common.h
• SERIAL_CONTROL_FLAG_MULTI : common.h
• SERIAL_CONTROL_FLAG_REPLY : common.h
• SERIAL_CONTROL_FLAG_RESPOND : common.h
• SERIAL_INVERTED : serial.h
• serial_msp_init() : serial_msp.c , serial_msp.h
• serial_msp_process() : serial_msp.c , serial_msp.h
• serial_msp_release_port() : serial_msp.c , serial_msp.h
• SERIAL_NOT_INVERTED : serial.h
• SERIAL_PARITY_EVEN : serial.h
• SERIAL_PARITY_NO : serial.h
• SERIAL_PORT_COUNT : target.h
• SERIAL_PORT_IDENTIFIER_MAX : serial.h
• SERIAL_PORT_NONE : serial.h
• SERIAL_PORT_SOFTSERIAL1 : serial.h
• SERIAL_PORT_SOFTSERIAL2 : serial.h
• SERIAL_PORT_UART1 : serial.h
• SERIAL_PORT_UART2 : serial.h
• SERIAL_PORT_UART3 : serial.h
• SERIAL_PORT_UART4 : serial.h
• SERIAL_PORT_UART5 : serial.h
• SERIAL_PORT_USB_VCP : serial.h
• SERIAL_RX : target.h
• SERIAL_RX_FRAME_COMPLETE : rx.h
• SERIAL_RX_FRAME_FAILSAFE : rx.h
• SERIAL_RX_FRAME_PENDING : rx.h
• SERIAL_STOPBITS_1 : serial.h
• SERIAL_STOPBITS_2 : serial.h
• SERIAL_UNIDIR : serial.h
• serialBeginWrite() : serial.c , serial.h
• serialEndWrite() : serial.c , serial.h
• serialFindPortConfiguration() : serial.c , serial.h
• serialGetAvailablePortCount() : serial.c , serial.h
• serialGetBaudRate() : serial.c , serial.h
• serialInit() : serial.c , serial.h
• serialIsPortAvailable() : serial.c , serial.h
• serialPort_t : serial.h
• serialPortCount : serial.c , io_serial_unittest.cc
• serialPortFunction_e : serial.h
• serialPortIdentifier_e : serial.h
• serialPortIdentifiers : config.c , serial.h
• serialPortUsage_t : serial.h
• serialPrint() : serial.c , serial.h
• serialRead() : serial.c , serial.h
• serialReceiveCallbackPtr : serial.h
• serialRemovePort() : serial.c , serial.h
• SERIALRX_IBUS : rx.h
• serialrx_provider : rx.h
• SERIALRX_PROVIDER_COUNT : rx.h
• SERIALRX_PROVIDER_MAX : rx.h
• SERIALRX_SBUS : rx.h
• SERIALRX_SPEKTRUM1024 : rx.h
• SERIALRX_SPEKTRUM2048 : rx.h
• SERIALRX_SUMD : rx.h
• SERIALRX_SUMH : rx.h
• SERIALRX_XBUS_MODE_B : rx.h
• SERIALRX_XBUS_MODE_B_RJ01 : rx.h
• serialRxBytesWaiting() : serial.c , serial.h
• serialrxFrameState_t : rx.h
• serialRxFrameStatus() : rx.c
• serialRxInit() : rx.c
• SerialRXType : rx.h
• serialSetBaudRate() : serial.c , serial.h
• serialSetMode() : serial.c , serial.h
• serialTxBytesFree() : serial.c , serial.h
• serialUART1() : serial_uart_impl.h
• serialUART2() : serial_uart_impl.h
• serialUART3() : serial_uart_impl.h
• serialUART4() : serial_uart_impl.h
• serialUART5() : serial_uart_impl.h
• serialWrite() : serial.h , serial.c
• serialWriteBuf() : serial.c , serial.h
• serialWriteBufShim() : serial.c , serial.h
• servo_angle_max : tilt.h
• servo_angle_min : tilt.h
• servo_lowpass_enable : mixer.h
• servo_lowpass_freq : mixer.h
• servo_pwm_rate : mixer.h
• servoCenterPulse : mixer.h
• servoConf : mixer.h
• servos : config.h
• SET : platform.h
• SET_COMM_FEATURE : usb_prop.h
• SET_CONTROL_LINE_STATE : usb_prop.h
• SET_LINE_CODING : usb_prop.h
• Set_System() : hw_config.c , hw_config.h
• Set_USBClock() : hw_config.c , hw_config.h
• setAccelerationTrims() : main.c
• setEscHi() : serial_4way_impl.h
• setEscInput() : serial_4way_impl.h
• setEscLo() : serial_4way_impl.h
• setEscOutput() : serial_4way_impl.h
• setLedHsv() : main.c , light_ws2811strip.c , light_ws2811strip.h
• setLedValue() : light_ws2811strip.c , light_ws2811strip.h
• setPrintfSerialPort() : printf.h , printf.c
• setStripColor() : light_ws2811strip.c , light_ws2811strip.h , main.c
• setStripColors() : light_ws2811strip.c , light_ws2811strip.h
• setup() : config_streamer_unittest.cc
• SHORT_FLASH_DURATION : system.c
• shortGitRevision : version.c , version.h
• sin_approx : maths.h , maths.c
• sinPolyCoef3 : maths.c
• sinPolyCoef5 : maths.c
• sinPolyCoef7 : maths.c
• sinPolyCoef9 : maths.c
• SITL_EEPROM_NUM_PAGES : main.c
• SITL_EEPROM_PAGE_SIZE : main.c
• SITL_FRAME_QUAD_PLUS : sitl.h
• SITL_FRAME_QUAD_X : sitl.h
• SITL_FRAME_RANGER_TILT_X : sitl.h
• sitl_frame_type_t : sitl.h
• SITL_FRAME_UNKNOWN : sitl.h
• SITL_MODE_PHYSICS_ON_CLIENT : sitl.h
• SITL_MODE_PHYSICS_ON_SERVER : sitl.h
• SKIP_CLI_COMMAND_HELP : target.h
• SKIP_RC_ON_SUSPEND_PERIOD : rx.c
• SKIP_RC_SAMPLES_ON_RESUME : rx.c
• SKIP_TASK_STATISTICS : target.h
• SLUGS_MODE : slugs.h
• SLUGS_MODE_ENUM_END : slugs.h
• SLUGS_MODE_GROUNDED : slugs.h
• SLUGS_MODE_ISR : slugs.h
• SLUGS_MODE_LANDING : slugs.h
• SLUGS_MODE_LIFTOFF : slugs.h
• SLUGS_MODE_LINE_PATROL : slugs.h
• SLUGS_MODE_LOST : slugs.h
• SLUGS_MODE_MID_LEVEL : slugs.h
• SLUGS_MODE_NONE : slugs.h
• SLUGS_MODE_PASSTHROUGH : slugs.h
• SLUGS_MODE_RETURNING : slugs.h
• SLUGS_MODE_SELECTIVE_PASSTHROUGH : slugs.h
• SLUGS_MODE_WAYPOINT : slugs.h
• small_angle : imu.h
• soft_gyro_lpf_hz : gyro.h
• SOFTSERIAL1 : serial_softserial.h
• SOFTSERIAL2 : serial_softserial.h
• SOFTSERIAL_1_TIMER : target.h
• SOFTSERIAL_1_TIMER_RX_HARDWARE : target.h
• SOFTSERIAL_1_TIMER_TX_HARDWARE : target.h
• SOFTSERIAL_2_TIMER : target.h
• SOFTSERIAL_2_TIMER_RX_HARDWARE : target.h
• SOFTSERIAL_2_TIMER_TX_HARDWARE : target.h
• SOFTSERIAL_BUFFER_SIZE : serial_softserial.h
• softSerialPortIndex_e : serial_softserial.h
• softSerialReadByte() : serial_softserial.h
• softSerialRxBytesWaiting() : serial_softserial.h
• softSerialSetBaudRate() : serial_softserial.h
• softSerialTxBytesFree() : serial_softserial.h
• softSerialWriteByte() : serial_softserial.h
• solution : gps.c
• SONAR : target.h
• sonar_calc_altitude() : sonar.h
• SONAR_ECHO_GPIO : target.h
• SONAR_ECHO_PIN : target.h
• SONAR_EXTI_IRQN : target.h
• SONAR_EXTI_LINE : target.h
• SONAR_EXTI_PIN_SOURCE : target.h
• sonar_get_altitude() : sonar.h
• sonar_init() : sonar.h
• SONAR_OUT_OF_RANGE : sonar.h
• SONAR_PWM_ECHO_GPIO : target.h
• SONAR_PWM_ECHO_PIN : target.h
• SONAR_PWM_EXTI_IRQN : target.h
• SONAR_PWM_EXTI_LINE : target.h
• SONAR_PWM_EXTI_PIN_SOURCE : target.h
• SONAR_PWM_TRIGGER_GPIO : target.h
• SONAR_PWM_TRIGGER_PIN : target.h
• sonar_read() : sonar.h
• SONAR_TRIGGER_GPIO : target.h
• SONAR_TRIGGER_PIN : target.h
• sonar_update() : sonar.h
• sonarAlt : flight_altitudehold_unittest.cc
• sonarCfAltCm : flight_altitudehold_unittest.cc
• sonarGetHardwareConfiguration() : main.c
• sonarGPIOConfig_t : pwm_mapping.h
• sonarInit() : sonar_unittest.cc
• sonarMaxAltWithTiltCm : flight_altitudehold_unittest.cc
• sonarMaxTiltDeciDegrees : sonar_unittest.cc
• SOURCE_EDGE : pwm_rx.c
• SOURCE_OVERFLOW : pwm_rx.c
• spcColors : ledstrip.h
• Speed_10MHz : gpio.h
• Speed_2MHz : gpio.h
• Speed_50MHz : gpio.h
• SPEKTRUM_BIND : target.h
• spektrum_sat_bind : rx.h
• SPEKTRUM_SAT_BIND_DISABLED : spektrum.h
• SPEKTRUM_SAT_BIND_MAX : spektrum.h
• spektrumBind() : spektrum.h
• spektrumFrameStatus() : spektrum.h
• spektrumInit() : spektrum.h
• SPI1_GPIO : target.h
• SPI1_GPIO_PERIPHERAL : target.h
• SPI1_MISO_PIN : target.h
• SPI1_MISO_PIN_SOURCE : target.h
• SPI1_MOSI_PIN : target.h
• SPI1_MOSI_PIN_SOURCE : target.h
• SPI1_NSS_GPIO : target.h
• SPI1_NSS_PERIPHERAL : target.h
• SPI1_NSS_PIN : target.h
• SPI1_NSS_PIN_SOURCE : target.h
• SPI1_SCK_PIN : target.h
• SPI1_SCK_PIN_SOURCE : target.h
• SPI2_GPIO : target.h
• SPI2_GPIO_PERIPHERAL : target.h
• SPI2_MISO_PIN : target.h
• SPI2_MISO_PIN_SOURCE : target.h
• SPI2_MOSI_PIN : target.h
• SPI2_MOSI_PIN_SOURCE : target.h
• SPI2_NSS_PIN : target.h
• SPI2_NSS_PIN_SOURCE : target.h
• SPI2_SCK_PIN : target.h
• SPI2_SCK_PIN_SOURCE : target.h
• SPI_0_28125MHZ_CLOCK_DIVIDER : bus_spi.h
• SPI_0_5625MHZ_CLOCK_DIVIDER : bus_spi.h
• SPI_18MHZ_CLOCK_DIVIDER : bus_spi.h
• SPI_9MHZ_CLOCK_DIVIDER : bus_spi.h
• spiBusInit() : hardware_revision.h
• spiInit() : bus_spi.c , bus_spi.h
• spiIsBusBusy() : bus_spi.h , bus_spi.c
• SPIN_RATE_LIMIT : imu.c
• spiSetDivisor() : bus_spi.c , bus_spi.h
• spiTransfer() : bus_spi.h , bus_spi.c
• spiTransferByte() : bus_spi.c , bus_spi.h
• sprintf : printf.h
• sq : maths.h
• STANDARD_ENDPOINT_DESC_SIZE : usb_desc.h
• startStep : rc_controls.h
• stateFlags : blackbox.h , main.c , flight_altitudehold_unittest.cc
• status : gps.c
• STATUS1_DATA_OVERRUN : compass_ak8963.c
• STATUS1_DATA_READY : compass_ak8963.c
• STATUS2_DATA_ERROR : compass_ak8963.c
• STATUS2_MAG_SENSOR_OVERFLOW : compass_ak8963.c
• stdev_t : maths.h
• step : rx.h
• STICK_CHANNEL_COUNT : rx.h
• STR : version.h , utils.h
• STR_HELPER : version.h , utils.h
• String_Descriptor : usb_prop.c
• sumdFrameStatus() : sumd.h
• sumdInit() : sumd.h
• SUMH_BAUDRATE : sumh.c
• SUMH_FRAME_SIZE : sumh.c
• SUMH_MAX_CHANNEL_COUNT : sumh.c
• sumhFrameStatus() : sumh.h
• sumhInit() : sumh.h
• Suspend() : usb_pwr.h , usb_pwr.c
• SUSPENDED : usb_pwr.h
• SVC_Handler() : stm32_it.c , stm32_it.h
• svinfo : gps.c
• sys_acc_read : system_calls.h
• sys_beeper_off : system_calls.h
• sys_beeper_on : system_calls.h
• sys_eeprom_erase_page : system_calls.h
• sys_eeprom_get_info : system_calls.h
• sys_eeprom_read : system_calls.h
• sys_eeprom_write : system_calls.h
• sys_get_pressure : system_calls.h
• sys_get_temperature : system_calls.h
• sys_gyro_read : system_calls.h
• sys_led_off : system_calls.h
• sys_led_on : system_calls.h
• sys_led_toggle : system_calls.h
• sys_micros : system_calls.h
• sys_micros_t : system_calls.h
• sys_millis : system_calls.h
• sys_millis_t : system_calls.h
• sys_motor_write : system_calls.h
• sys_range_read : system_calls.h
• sys_servo_write : system_calls.h
• system : config.h
• SYSTEM_ACC_1G : system_calls.h
• SYSTEM_GYRO_RANGE : system_calls.h
• SYSTEM_GYRO_SCALE : system_calls.h
• SYSTEM_STATE_CONFIG_LOADED : main.c
• SYSTEM_STATE_INITIALISING : main.c
• SYSTEM_STATE_MOTORS_READY : main.c
• SYSTEM_STATE_READY : main.c
• SYSTEM_STATE_SENSORS_READY : main.c
• SYSTEM_STATE_TRANSPONDER_ENABLED : main.c
• systemBeep() : sound_beeper.c , sound_beeper.h
• systemBeepPtr : sound_beeper.c
• systemInit() : system.c , system.h
• systemReset() : system.h , main.c , system_stm32f10x.c , system_stm32f30x.c
• systemResetToBootloader() : system_stm32f30x.c , system_stm32f10x.c , main.c , system.h
• systemState_e : main.c
• SysTick_Handler() : stm32_it.h , system.c