target.h File Reference

Go to the source code of this file.

Macros
#define	TARGET_BOARD_IDENTIFIER   "CJM1"
#define	USE_HARDWARE_REVISION_DETECTION
#define	LED0_GPIO   GPIOC
#define	LED0_PIN   Pin_14
#define	LED0
#define	LED0_PERIPHERAL   RCC_APB2Periph_GPIOC
#define	LED1_GPIO   GPIOC
#define	LED1_PIN   Pin_13
#define	LED1
#define	LED1_PERIPHERAL   RCC_APB2Periph_GPIOC
#define	LED2_GPIO   GPIOC
#define	LED2_PIN   Pin_15
#define	LED2
#define	LED2_PERIPHERAL   RCC_APB2Periph_GPIOC
#define	USE_TILT   0
#define	ACC
#define	USE_ACC_MPU6050
#define	GYRO
#define	USE_GYRO_MPU6050
#define	USE_BEEPER   0
#define	USE_MAG   1
#define	USE_MAG_HMC5883
#define	BRUSHED_MOTORS
#define	USE_UART1
#define	USE_UART2
#define	SERIAL_PORT_COUNT   2
#define	USE_I2C
#define	I2C_DEVICE   (I2CDEV_1)
#define	DEFAULT_RX_FEATURE   FEATURE_RX_PPM
#define	SERIAL_RX
#define	USE_CLI
#define	SPEKTRUM_BIND
#define	BIND_PORT   GPIOA
#define	BIND_PIN   Pin_3
#define	USE_QUAD_MIXER_ONLY   1
#define	SKIP_TASK_STATISTICS
#define	SKIP_CLI_COMMAND_HELP

Macro Definition Documentation

#define ACC

#define BIND_PIN   Pin_3

#define BIND_PORT   GPIOA

#define BRUSHED_MOTORS

#define DEFAULT_RX_FEATURE   FEATURE_RX_PPM

#define GYRO

#define I2C_DEVICE   (I2CDEV_1)

#define LED0

#define LED0_GPIO   GPIOC

#define LED0_PERIPHERAL   RCC_APB2Periph_GPIOC

#define LED0_PIN   Pin_14

#define LED1

#define LED1_GPIO   GPIOC

#define LED1_PERIPHERAL   RCC_APB2Periph_GPIOC

#define LED1_PIN   Pin_13

#define LED2

#define LED2_GPIO   GPIOC

#define LED2_PERIPHERAL   RCC_APB2Periph_GPIOC

#define LED2_PIN   Pin_15

#define SERIAL_PORT_COUNT   2

#define SERIAL_RX

#define SKIP_CLI_COMMAND_HELP

#define SKIP_TASK_STATISTICS

#define SPEKTRUM_BIND

#define TARGET_BOARD_IDENTIFIER   "CJM1"

#define USE_ACC_MPU6050

#define USE_BEEPER   0

#define USE_CLI

#define USE_GYRO_MPU6050

#define USE_HARDWARE_REVISION_DETECTION

#define USE_I2C

#define USE_MAG   1

#define USE_MAG_HMC5883

#define USE_QUAD_MIXER_ONLY   1

#define USE_TILT   0

#define USE_UART1

#define USE_UART2